BLOWER - Intelligent warm air blower

Product plus points

• The control box can be quickly customised by changing the front cover.
• The appliance can be fitted to towel dryers with different widths - of between 500mm and 600mm overall – with no soldering or use of any additional tools.
• Width of 120mm – this facilitates the hanging of towels and makes the appliances perfect for use in small bathrooms.
• Air flow Optimized: the blower fins are swiveling/multi-directional.
• Removable anti-dust filter: cleanable, without removing the blower, with a damp sponge.
• Blower located at the bottom of the towel heater: - Keep the minimum distance between the towel heater and the wall, ideal for narrow space. - Keep the facilities to hang the towels like a classic towel heater.
• Infra-red remote control option: control from a distance, delivered with a wall support.
• Tangencial turbine blower insuring a low noise level.
• anti-vibration device.
• A safety feature prevents the unvoluntary air flow obsturations (filter and ventilation grille) shutting down/switching off the blower.
• A safety feature prevents the room temperature from getting too high when in Boost Mode.
• Saving of the settings: by EEPROM in case of a power shut down.
• "Intelligent" electronic regulation: it provides year-round maintenance of a stable and precise temperature in your home.
• A zero-voltage control device reduces electromagnetic interference compliant with French standard (NF) performance criteria.
• High-precision electronic PID (Proportional Integrated Derivative) temperature regulation.
• An incorporated temperature sensor, which cannot be accessed from the outside: the product is more resistant during shipments and when you’re installing it.
• Integrated water-removal system.
• Internal protection against heating anomalies.

Technical characteristics

• Regulator
  • Voltage when in use: 230V +/-10% 50Hz..
  • ON/OFF switch: 10000 cycles approval.
  • Electric Consumption when the switch is in OFF position: 0W.

• Blower turbine and resistance integrated
  • Over heating security integrated.
  • Maximum power: 1000W.
  • Relay.

• Outlet for two Class II immersion heaters
  • Maximum power: 1250W resistive load.
  • Relay + triac control device at 0 Voltage.
  • Anti-overheating security by bimetal TCO.

• Power cord
  • Class II: 800mm, 2 conductors or 3 conductors.
  • Class I: 1100mm, 3 conductors.

• Safety
  • Standards: EN60335-1/EN60335-2-30/EN60335-2-43.

• Environment
  • Protection factor: IP24.
  • Class: Class II after installation under the responsability of the integrator.
  • Operating temperature: 0°C to 50°C.
  • Temperature setting range: +10°C to +30°C.
  • Storage temperature: -20°C to +70°C.
  • Electronic PID (Proportional Integrated Derivative) control with microprocessor.
  • Electronic NTC (Negative Temperature Coefficient) sensor with microprocessor.
  • 6-order pilot wire (versions BXEBLOWA2PA, BXEBLOWA2PGA).