RTDSC - Wired room temperature thermostat

Product plus points

• Sober design - suitable for traditional or contemporary interiors.
• Practical: the product has a small footprint.
• Wide display screen, blue backlighting.
• Excellent ergonomics and user experience when setting: 4 keys for intuitive use.
• Child safety: keypad locking.
• Settings safety: - Settings restricted in respect of a minimum temperature set point. - Settings restricted in respect of a maximum temperature set point.
• Digital-control room temperature thermostat for a wired terminal block for an underfloor heating/cooling system.
• The sensor probe thermostat was designed to provide you with an increased level of comfort and with energy savings.
• Selection of user language: English, French, Italian or German.
• Selection of temperature unit: degrees Celsius or degrees Fahrenheit.
• Selection of product usage type: use with an underfloor heating system, with a panel heater or with a forced air system.
• Configuration of the output for the NO or NC thermal actuators.
• Calibration of the display temperature.
• Selection of temperature regulation type: PID (Proportional Integral Derivative) or On/Off control.
• Manual system test: override of the outputs (heating switched or put into heating standby mode).
• Intallation on a junction box.

Technical characteristics

• Power supply
  • Voltage when in use: 24VAC or 230V +/-10% 50Hz.
  • Typical power consumption: 30mA.
  • Electronic output: 24VAC +/- 10%, 50Hz, 0.7A maximum or 230VAC +/- 10%, 50Hz, 1A maximum.
  • Connection: by means of clamp terminals for cables with 0.5 square mm to 1.5 square mm cross-sections.

• Safety
  • Standards: EN60730-1, EN60730-2-9.
  • Software: Class A.
  • Environmental pollution degree: 2.
  • Overvoltage category II, 2.5kV surge.

• Environment
  • Protection rating: IP20.
  • Class: Class II.
  • Operating temperature: 0°C to 40°C.
  • Temperature setting range: +5°C to +30°C.
  • Storage temperature: -10°C to +50°C.