Your browser is out-of-date !

update your browser to view this website correctly. Update my browser now

RTDSCEC - Wired room temperature thermostat with ECO and C/O inputs

Main features

  • Child safety.
  • Room temperature control.
  • Connection to a thermal actuator or to a wired terminal block for a underfloor heating/cooling system.
  • Wired transmission of the set temperature and the measured temperature.
  • Desired temperature setting.
  • Selection of operating mode (Auto, Eco, Comfort, Frost protection, Heating on Standby).
  • Heating/cooling input (C/O): switching from heating to cooling and vice-versa.
  • Temperature decrease (Eco mode): lowering of the Comfort Mode set temperature mode by 3°C.
  • Viewing of settings, of the room and set temperatures, and of keypad locking.

Main features

  • Child safety.
  • Room temperature control.
  • Connection to a thermal actuator or to a wired terminal block for a underfloor heating/cooling system.
  • Wired transmission of the set temperature and the measured temperature.
  • Desired temperature setting.
  • Selection of operating mode (Auto, Eco, Comfort, Frost protection, Heating on Standby).
  • Heating/cooling input (C/O): switching from heating to cooling and vice-versa.
  • Temperature decrease (Eco mode): lowering of the Comfort Mode set temperature mode by 3°C.
  • Viewing of settings, of the room and set temperatures, and of keypad locking.

Product plus points

  • Sober design - suitable for traditional or contemporary interiors.
  • Practical: the product has a small footprint.
  • Wide display screen, blue backlighting.
  • Excellent ergonomics and user experience when setting: 5 keys for intuitive use.
  • Child safety: keypad locking.
  • Settings safety: - Settings restricted in respect of a minimum temperature set point. - Settings restricted in respect of a maximum temperature set point.
  • Digital-control room temperature thermostat for a wired terminal block for an underfloor heating/cooling system.
  • The room temperature thermostat was designed to provide you with an increased level of comfort and with energy savings.
  • Selection of user language: English, French, Italian or German.
  • Selection of temperature unit: degrees Celsius or degrees Fahrenheit.
  • Selection of product usage type: use with an underfloor heating system, with a panel heater or with a forced air system.
  • Configuration of the heating/cooling mode command input (C/O).
  • Configuration of the output for the NO or NC thermal actuators.
  • Configuration of the command input for the decrease in temperature in Eco or Frost protection modes.
  • Calibration of the display temperature.
  • Selection of temperature regulation type: PID (Proportional Integrated Derivative) or On/Off control.
  • Manual system test: override of the outputs (heating switched or put into heating standby mode).
  • Intallation on a junction box.

Technical characteristics

  • Power supply
    • Voltage when in use: 24VAC or 230V +/-10% 50Hz.
    • Typical power consumption: 30mA.
    • Electronic output: 24VAC +/- 10%, 50Hz, 0.7A maximum or 230VAC +/- 10%, 50Hz, 1A maximum.
    • Connection: by means of clamp terminals for cables with 0.5 square mm to 1.5 square mm cross-sections.
  • Safety
    • Standards: EN60730-1, EN60730-2-9.
    • Software: Class A.
    • Environmental pollution degree: 2.
    • Overvoltage category II, 2.5kV surge.
  • Environment
    • Protection rating: IP20.
    • Class: Class II.
    • Operating temperature: 0°C to 40°C.
    • Temperature setting range: +5°C to +30°C.
    • Storage temperature: -10°C to +50°C.

CODESREFERENCES
RTDSCECIMHA Wired digital-control thermostat, with ECO and CO inputs, white, for 230V underfloor heating/cooling system
RTDSCVECIMHA Wired digital-control thermostat, with ECO and CO inputs, white, for 24V underfloor heating/cooling system

RANGE OF THERMOSTATS FOR UNDERFLOOR HEATING


Download imh-fp_rtdscec_eng_v02_121017.pdf