TH2 - Rectangular housing

Product plus points

• Sober and simple design: the temperature control panel located at the bottom of the manifold on the right-hand side of the dryer is a harmonious part of the overall design of the towel dryer.
• Practical: small-sized product.
• Boost: can be set for one hour or two hours, it accelerates the rate at which a bathroom heats up and also enables laundry and wet towels to be dried quickly.
• A safety feature prevents the room temperature from getting too high when in Boost Mode.
• Saving of the settings by EEPROM in case of a power shut down.
• "Intelligent" electronic regulation: it provides year-round maintenance of a stable and precise temperature in your home.
• A zero-voltage control device reduces electromagnetic interference, compliant with French standard (NF) performance criteria.
• High-precision electronic PID (Proportional Integral Derivative) temperature regulation.
• Internal protection against heating anomalies.

Technical characteristics

• Power supply
  • Voltage when in use: 230V +/-10% 50Hz.
  • Maximum power: 2000W resistive load.
  • Power cord: 800mm.

• Safety
  • Standards: EN60335-1/EN60335-2-30 (Subject to an installation in the towel heater by the integrator according to specifications). EN60730-1/EN60730-2-9.

• Environment
  • Protection factor: IP44.
  • Class: Class II after installation under the responsability of the integrator.
  • Operating temperature: 0°C to 50°C.
  • Temperature setting range: +8°C to +30°C.
  • Storage temperature: -20°C to +70°C.
  • Boost function: 1 or 2 hours (anti-overheating protection: room temperature limited to +40°C max.).
  • Electronic PID (Proportional Integrated Derivative) control with microprocessor.
  • Electronic NTC (Negative Temperature Coefficient) sensor with microprocessor.
  • 6-order pilot wire.